Intel's 6-core Dunnington CPU coming this year, Nehalem gets official
P.S. That's Nehalem pictured. What, can't you tell?
[Via BetaNews, thanks Mike O.]
P.S. That's Nehalem pictured. What, can't you tell?
[Via BetaNews, thanks Mike O.]
Relevant Posts
- Intel launches six-core Xeon 7400, your bank account shudders (20 days ago - 61 Comments)
- Intel: oh yeah, and we're calling Nehalem Core i7 (57 days ago - 124 Comments)
- 16GB Hynix DDR3 RAM modules demonstrated at IDF (45 days ago - 82 Comments)
- Intel hoping to get Larrabee within next-gen Xbox? (30 days ago - 48 Comments)
- CE-Oh no he didn't! Part LVIII: NVIDIA CEO doesn't know what Larrabee is, doesn't care (40 days ago - 62 Comments)
Reader Comments (Page 1 of 2)
initialxy @ Mar 18th 2008 6:58AM
wow nice, AMD is seriously in trouble. they are nowhere near 8 cores, aren't they?
broli @ Mar 18th 2008 8:49AM
Actually AMD is the only one currently with native quadcores on the market whereas Intel will have natives with the nehalem architecture. Both will need to glue them together for an octo core.
Scott Equine @ Mar 18th 2008 8:52AM
Sure, AMD does have native quad four already but only on 65-nm, right? I believe 45-nm is impressive because its virtually impossible to do using SiO2... so Intel have changed the process to use Hafnium instead.
stretchsje @ Mar 18th 2008 9:11AM
AMD is actually very close to 6 and 8 cores. Their architecture is robust even if it isn't as efficient clock-for-clock as Intel's current stuff. AMD needs 45nm manufacturing to shrink the chips to a point where adding more cores makes sense.
Jim Bob @ Mar 18th 2008 10:27AM
Robust architecture is nice and all, but they're not delivering.
Adam Zey @ Mar 18th 2008 3:22PM
Intel applies their tick-tock approach to core count increases too. Tick and they take two single-core dies and glue them together. Tock and they properly mate them in a true dual-core solution on a single die. Tick and they glue two dual-core dies together. Tock and they make a proper quad-core solution.
AMD's approach is to only ever put out a "proper" solution. This has advantages and disadvantages. The big disadvantage is cost. They're building one single die that is double the size. This double their failure rate; they're twice as likely to produce a bad die because there is twice as much surface area. The advantage, however, is that it's a more efficient solution, using less power (and producing less heat).
Intel's approach has the advantage of cost. The dual-core dies are produced separately and working ones are glued together. Their yields are the same as before, and they waste less silicon. It's especially easier to produce higher performing parts, something AMD has had serious issues with when it comes to the Phenom (and their only-true-multicore approach is probably part of the problem). So Intel can push their parts faster (and cheaper) due to better yields. They can also get their parts out far sooner, as much less R&D is required for the initial product. The disadvantage is that they're less efficient, producing more heat and drawing more power.
Anybody who simply dismisses Intel's approach just because they're gluing two dies together obviously hasn't evaluated the advantages and disadvantages of each approach. I, for one, prefer Intel's approach; at the moment, it's producing faster cheaper chips sooner at the expense of heat/power, which eventually gets corrected.
Syntax Error @ Mar 18th 2008 6:59AM
And Intel widens the gap.
Mark @ Mar 18th 2008 11:41AM
And Intel widens AMD's asshole. C'mon AMD let's see some competition!
D-Zyner @ Mar 18th 2008 7:03AM
I want one!
webon @ Mar 18th 2008 7:35AM
so as everybody else here, just my guess
Paris @ Mar 18th 2008 8:30AM
I want many things but a 6-core CPU is not one of them.
Jonathon @ Mar 18th 2008 10:42AM
@Paris, I can understand not saying that you "need" something but what do you currently have that would make you not even "want" a 6-core CPU rig?
Paris @ Mar 18th 2008 1:45PM
@Jonathon
I would have no use for a 6 core CPU therefore I don't want one. (If someone offered to give one free to me I would only want it to sell it to someone else).
A Dancing Hobo @ Mar 18th 2008 7:09AM
Whatever I'm still rocking my Socket A Athlon!...
...I wan't one! (or two)
andy @ Mar 18th 2008 10:02AM
Socket?
I'm using an Athlon 650. (that's SLOT A for all you young uns out there)
ITRanger @ Mar 18th 2008 7:16AM
This is AMD calling .... WE NEED CASH FAST!
Google, Microsoft, ... All are welcome!!!
Nate @ Mar 18th 2008 7:17AM
"Quad-core shmod-core Intel, we need 6 cores or more to keep our uh, web browsers snappy. While you're at it, how about tossing in some Simultaneous Multithreading (SMT) so that each core can process two threads at a time -- 16 simultaneous threads per 8-core processor or 32 for dual-processor, 8-core rigs. If that sounds good then you're in luck; Intel just went official with its near-term architecture plans which include the 2008 launch of a 6-core Dunnington-class server CPU platform based on Intel's 45-nm Penryn "tick" architecture. On deck is Intel's second generation Nehalem "tock" architecture with SMT and scalable from 2- to 8-cores. We're talking "dramatic" performance and energy improvements, according to Intel, from a microarchitecture bent on delivering an 8 MB level-3 cache, DDR3-800 memory support, 25.6GB per second Quickpath interconnects (so long Front Side Bus!), an integrated memory controller and optional integrated graphics to high-end servers and eventually laptops. Hear that AMD? Tick, tock goes the clock."
... Huh?
aardvark sandwich @ Mar 18th 2008 7:21AM
No more front side bus?
Please expand :)
reticulate @ Mar 18th 2008 7:22AM
They're replacing it with something analogous with Hyperthreading on AMD's.
Can't remember what it's called, but it's essentially the same thing. A really ,really fast bus for everything.
aardvark sandwich @ Mar 18th 2008 7:25AM
ahh.
sweet. :)
bijanv @ Mar 18th 2008 7:57AM
there's no front side bus in many of the new CPU's and probably won't ever be. Busses take up too much space within the CPU and now that we can afford it, having a direction connection to each component within the CPU allows for much higher performance CPU's (as it reduces the load on each wire). Therefore each component (i.e. the ALU) has the minimum number of connections it needs and this takes away the need to have a bus connecting everything together.
JJ @ Mar 18th 2008 8:01AM
It's not hyperthreading, its hypertransport. They are replacing the front side bus with a much wider bus for communication between the cores (if they still decide to the that whole cpu talking over the bus instead of communicating directly) and for RAM access.
reticulate @ Mar 18th 2008 7:21AM
Oh shit, hyperthreaded multicore processors?
And I was all about to buy a Core2Quad.
Kizorblade @ Mar 18th 2008 7:32AM
Wait till the hyperthreaded quad core processors come out.
Remember to buy a bib while you're at it as well. Drooling is bad.
nintendo fanboy hater @ Mar 18th 2008 7:40AM
May i just ask... HOW necessary is this????!!?!?!?!?!?!?
Tim Brown @ Mar 18th 2008 7:50AM
Very!
Tim Brown @ Mar 18th 2008 7:54AM
Apart from the speed gains there are also efficiency gains and a reduction in power usage. http://www.reghardware.co.uk/2008/03/18/intel_sse_4_text_tweaks/
producerism @ Mar 18th 2008 8:16AM
obviously, you have never built a flux capacitor.
Dorz @ Mar 18th 2008 9:26AM
He/she has obviously never done any CGI or folding/number crunching.
marsdta @ Mar 18th 2008 4:30PM
@ producerism
That is the funniest thing i have read today. thanks for the chuckle
Sharakar @ Mar 18th 2008 7:47AM
it plays crysis at max setting with no videocard /sarcasm
nh @ Mar 18th 2008 7:58AM
I love these multicore chips. I have a Core 2 and watching the CPU usage gives a real insight into how they work. Something like ray tracing in Catia uses 100%, each core renders a different section of the screen and it halves the time taken. However, dynamic modelling in ADAMS uses only 1 core so the CPU never goes above 50% and there is no advantage except you can keep iTunes running with no penalty for your actual work!
So now it's the turn of the programmers to improve algorithms and make use of what is available. Quite a turnaround since it always used to be the chip manufactures who were playing catch up.
bobartig @ Mar 18th 2008 11:49AM
Some types of processing are serial, and just won't benefit much from parallelization as much as others. that's a limitation we can't get around easily without bumping clock speed.
mark @ Mar 18th 2008 8:06AM
hickory dickory dock, your wife went on my ...
jonathan @ Mar 18th 2008 8:16AM
this is going to be great for my virtualzation project next year...were talking some serious amounts of virtual machines to one piece of hardware....
Atanas Boev @ Mar 18th 2008 8:37AM
"P.S. That's Nehalem pictured. What, can't you tell?"
Yes, and the cores seem to be color-coded :)
craig.mayhew @ Mar 18th 2008 8:52AM
I can't wait to get one of these cranking out folding@home units!
nez @ Mar 18th 2008 9:19AM
Anyone else notice that along with QPI, Nehalem is eating up the memory controller? What will become of our GMCH?? Will it just be a dedicated PCIe hub?
OneLove @ Mar 18th 2008 10:36AM
They should have skipped 4 core and went straight to 6 or 8.
eggothewaffle @ Mar 18th 2008 11:22AM
And of course, today is also the day all the parts for my quad core, 8 GB ram, 2.3 TB hdd, 8800GT workstation beast machine came in :[
Damn you Intel!!!
Danny @ Mar 21st 2008 8:54AM
Why damn Intel? Quad core and 8GB memory.... Dude, (for now) thing uses more than 4GB of ram unless you run a server!
Also, wanting always the latest things is useless, you'd had to upgrade every 2 weeks.
Glenn @ Mar 18th 2008 11:58AM
Couldn't run a holodeck without one... or several... thousand.
Iam9376 @ Mar 18th 2008 1:34PM
CSI, Common System Interconnect is what is replacing the Front Side Bus
Peter for the uK @ Mar 18th 2008 3:30PM
I'm gonna wait till they bring out the OVER 9000!!! core chips before upgrading from mi G3. lolz
Allen @ Mar 18th 2008 6:24PM
Someone pointed out that this is useful for CGI or number crunching and protein folding. How often are normal users going to use those apps?
There are not even quad threaded applications yet, sans Flight Simulator 10, and the usefulness of quad threading for games is not fully explored yet. And they want to push out 6 core processors?
This is just a way to get consumers to waste their money. I hope at least retailers are kind and tell consumers the truth but I doubt it.
Also, adding more cores actually makes each individual core less efficient and less capable. Right now, thats not really an issue, but the effect builds as you add more cores, so eventually it could get to the point where adding more cores actually lowers the performance. Not to mention, this is just drawing more and more power....
asdf @ Mar 19th 2008 12:29AM
How would Intel name this new line of processors???
Lets see: Core 2 Duo, Core 2 Quad, Core 2 Se..
Ubuntu 7.10+WindowsXP @ Mar 19th 2008 5:49AM
I am not sure if AMD is really even going after Intel right now. With the blind side release of the ATI HD 3850 completely taking over the sub $200 GPU market with athority, and the near silent release of the 780G intergrated GPU, AMD seems to be spending its days plotting the death of Nvidia. Granted that ATI is still its own company, AMD seems to be hell bent on using GPU's to take near complete control over the low and mid-range markets. Even the new Nvidia 9600 GT can't kill the HD 3850 in price/performance, leaving the HD 3850 as the still number one choice for mid-range dedicated GPU power. The 780G is just plan evil. Once a better cooling solution is finished for laptop use, the 780G will virtually be the only choice for intergrated GPU's. When it takes a dedicated 8600M GT GPU to out perform an intergrate SOLUTION (I mean that one), that also boasts Blu-ray/HD DVD capabilities, over clocking to 1.1 Ghz, a 4 digit score in 3D-benchmark06, and a price point below $100 in motherboards with those chips, you are in trouble.
To me it seems AMD is more focused on the GPU market then trying to compete with Intel, at least during this Quarter. If AMD follows the same plan as the "ATI department" we should see something completely out of the blue from them in the next 3 months that no one knew about until a week before the release date.
Oinquer @ Mar 19th 2008 7:19AM
WEEEEEEEEEEE stuff cores insideeeeeeeeee
keep stuffinggg
till the end of year we will have about 16 core CPU :D
Anon @ Mar 20th 2008 7:58AM
People need to realize that our current software can barely utilize 2 cores, let alone 6. The real bottleneck of performance is the ability for code to utilize parallel processors/cores.
Until we can significantly change our programming mindset away from a serial mindset, or companies like RapidMind are able to save us, then these processors will be severely under-utilized. (http://csclub.uwaterloo.ca/media/Riding%20The%20Multi-core%20Revolution.html)
mark s @ Mar 18th 2008 9:55AM
I agree, but for me it would be great. 3DS Max rendering can use all of them, I have 4 cores at the moment, but seeing 32 render buckets on 1 frame would probably make me faint with excitement. not to mention that one machine like this would double the amount of cores on my render farm. :-D